LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2019 >> GS F >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Column Assembly >> Reassembly [10/2015 - ] >> Procedure

Reassembly [10/2015 - ]: Procedure

  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU 
    1. Install the multiplex tilt and telescopic ECU with the 2 screws.
  2. INSTALL STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY 
    NOTE:

    If the steering lock actuator assembly is replaced, refer to Registration.

    Refer to REGISTRATION [10/2015 - ]

    1. GTY460390Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Temporarily install the steering lock actuator or upper bracket assembly with 2 new steering lock set bolts.

    2. Tighten the 2 steering lock set bolts until the bolt head breaks off.
scientia non olet · About LEMON Manuals