DTC P2610-29: ECM/PCM Engine Off Timer Performance Signal Invalid; DTC P2610-93: ECM/PCM Engine Off Timer Performance No Operation [06/2018 - 08/2021]: Procedure

1. Replace the ECM.

   Refer to REMOVAL [06/2018 - 10/2019] , or refer to REMOVAL [10/2019 - 08/2021]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear the DTC.

   Powertrain > Engine > Clear DTCs 

5. Turn the engine switch off and wait for at least 30 seconds.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
2. Enter the following menus: Powertrain / Engine / Trouble Codes / Pending.

   Powertrain > Engine > Trouble Codes 

3. If no pending DTC is output, the repair has been successfully completed.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END