Customize Parameters [11/2017 - 01/2023]
- CUSTOMIZE LANE DEPARTURE ALERT SYSTEM (w/ Steering Control) NOTE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
- Customizing with the Multi-information display
- Turn the engine switch on (IG).
- Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup
- Select the setting by referring to the table below.
- Change the settings of the lane departure alert system (w/ Steering Control) using the steering pad switch assembly.
HINT:
Each item is displayed on the "Setting" screen on the multi-information display.
LANE DEPARTURE ALERT SYSTEM (W/ STEERING CONTROL)Display Content Setting Default Steering Assist Steering control function On/Off On Alert Method of lane departure alert Steering vibrator/Buzzer Steering vibrator Sensitivity Timing of lane departure alert High/Standard Standard Sway Warning Vehicle sway warning function On/Off On Sway Sensitivity Sway warning sensitivity High/Standard/Low Standard