Brake System (Complete): Remove & Replace
Includes: Replace Calipers and/or Wheel Cylinders, Brake Shoes and/or Pads. Clean, lube and/or replace Brake Hardware as necessary. Inspect Master Cylinder, all Hoses and bleed Brake System. Adjust Brakes (where applicable).
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| All Wheels | | 2.6 | | B |
| Combination Procedure: BRAKE HOSE: Replace: |
| Each | | 0.1 | | B |
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: |
| | 0.5 | | B |
| Combination Procedure: DISC ROTOR: Correct: |
| Lateral Runout,Each | Correct Rotor lateral runout by indexing. | 0.2 | | B |
| Combination Procedure: ELECTRONIC PARKING BRAKE SYSTEM: Disable & Enable: |
| Brake Pad Replacement Mode | Includes: Disable and enable electronic brake system with use of scan tool or interactive vehicle controls. | 0.2 | | B |
| Combination Procedure: HUB & ROTOR DISC: Clean & Inspect: |
| Corrosion,Each | Clean any rust or corrosion from mating surface of Hub/Axle Flange and Brake Rotor. | 0.2 | | B |
| Combination Procedure: PARKING BRAKE SHOE & LINING: Replace: |
| Each Side | | 0.4 | | B |
| Combination Procedure: WHEEL BEARING: Replace: |
| AWD, Front,Hub Assembly,One Side | | 0.6 | | B |
| AWD, Rear,Hub Assembly,One Side | DOES NOT include wheel alignment. | 2.7 | | B |