Installation [10/2015 - ]: Procedure
WARNING: This page is about a different car, the 2019 Lexus GS 300, 2018 Lexus GS 300, 2017 Lexus GS 200t, and 2016 Lexus GS 200t. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL SPARK PLUG
HINT:
Perform "Inspection After Repairs" after replacing the spark plug.
Refer to INITIALIZATION [10/2015 - 09/2018] or INITIALIZATION [09/2018 - ]
- Using a 16 mm spark plug wrench, install the 4 spark plugs.
Torque: 25 N*m (255 kgf*cm, 18 ft.*lbf)
NOTE:Replace with a new part if it is dropped or if it receives a strong impact.
- Using a 16 mm spark plug wrench, install the 4 spark plugs.
- INSTALL IGNITION COIL ASSEMBLY
HINT:
Perform "Inspection After Repairs" after replacing the ignition coil assembly.
Refer to INITIALIZATION [10/2015 - 09/2018] or INITIALIZATION [09/2018 - ]
- Install the 4 ignition coil assemblies with the 4 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
NOTE:Replace with a new part if it is dropped or if it receives a strong impact.
- Connect the 4 ignition coil assembly connectors.
- Install the 4 ignition coil assemblies with the 4 bolts.
- CONNECT NO. 3 PCV HOSE
See step 2
- INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
- Align the 3 grommets of the No. 1 engine cover sub-assembly with the 3 pins, and install the No. 1 engine cover sub-assembly by pressing it.