LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> GS 350 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Control System - Service Information) >> Crankshaft Position Sensor >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2019 Lexus GS 300, 2018 Lexus GS 300, 2017 Lexus GS 200t, and 2016 Lexus GS 200t. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 9 (10/2015 - 09/2016) or PROCEDURE - Step 9 (09/2016 -)

  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
    2. GTY504332Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Remove the bolt and crankshaft position sensor.

scientia non olet · About LEMON Manuals