Installation [07/2015 - ]: Procedure

1. Apply adhesive to 2 or 3 threads of the ventilation valve sub-assembly.

   Adhesive

   Toyota genuine adhesive 1324, three bond 1324 or equivalent

2. Using a 19 mm deep socket wrench, install the ventilation valve sub-assembly to the ventilation case sub-assembly.

   Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf) 

3. Install the No. 2 ventilation hose to the ventilation valve sub-assembly.

Refer to INSTALLATION [07/2015 - ]