DTC C1298: Linear Solenoid Circuit [08/2019 - ]: Description

WARNING: This page is about a different variant/trim than selected.

The 4WD ECU assembly receives signals from each sensor. The signals are used to control the clutch fluid pressure to vary the distribution of torque in accordance with the driving conditions.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C1298	Linear Solenoid Circuit	When all of the following continue for 1 second or more: The voltage at terminal IG 1 is 9.5 V or more. The target current for the 4WD linear solenoid (electro magnetic control coupling sub-assembly) is either 0 A or 0.8 A or more. An open or short is detected in the linear solenoid circuit.	Wire harness and connector 4WD linear solenoid (Electro magnetic control coupling sub-assembly) 4WD ECU assembly