LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RX 350 Base, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Warning Buzzer - Service Information >> Pre-Collision System Warning Buzzer >> Removal [08/2019 - ] >> Procedure

Removal [08/2019 - ]: Procedure

  1. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU 

    Refer to REMOVAL [08/2019 - ]

  2. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Using a clip remover, disengage the clamp.
      GTY653730Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector to remove the skid control buzzer assembly.
      NOTE:

      If the skid control buzzer assembly has been struck or dropped, replace it with a new one.

scientia non olet · About LEMON Manuals