LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RX 350 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Smart Access System With Push-Button Start (For Start Function) - Diagnostic Codes & Symptom Tests >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) >> DTC B2271: Ignition Hold Monitor Malfunction [09/2015 - ] >> Description

DTC B2271: Ignition Hold Monitor Malfunction [09/2015 - ]: Description

This DTC is stored when a malfunction in the IG circuit or IG hold circuit of the certification ECU (smart key ECU assembly) is detected.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B2271 Ignition Hold Monitor Malfunction When either of the following conditions is met (1-trip detection logic*1):
  • The IG circuit of the certification ECU (smart key ECU assembly) is malfunctioning.*2
  • The IG hold circuit of the certification ECU (smart key ECU assembly) is malfunctioning.*3
  • AM2 fuse
  • Certification ECU (smart key ECU assembly)
  • Wire harness or connector
 DTC Output Confirmation Operation: 
  1. Turn the engine switch on (IG).
  1. *1: Only detected while a malfunction is present and the engine switch is on (IG).
  2. *2: The IG circuit and IG hold circuit activate the IG relay.
  3. *3: After the IG circuit turns on, even if the certification ECU (smart key ECU assembly) malfunctions, the IG hold circuit will maintain the power source mode in on (IG).
VEHICLE CONDITION AND FAIL-SAFE FUNCTION WHEN MALFUNCTION DETECTED

Vehicle Condition when Malfunction Detected Fail-safe Function when Malfunction Detected
The engine switch cannot be turned on (IG) (the engine cannot be started). The power source mode cannot be changed to on (IG).
RELATED DATA LIST AND ACTIVE TEST ITEMS

DTC No. Data List and Active Test
B2271 Power Source Control 
  • IG Relay Monitor (Inside)
  • Latch Circuit

Starting Control 
  • Ignition
scientia non olet · About LEMON Manuals