DTC C1ABC: Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete [09/2014 - 03/2019]: Procedure

1. Perform the Blind Spot Monitor Beam Axis Adjustment using the Techstream.

   Body Electrical > Blind Spot Monitor Slave > Utility 

   Tester Display
   BSM Slave Beam Axis Adjustment

   HINT: 

   Refer to Blind Spot Monitor Beam Axis Confirmation.

   Refer to OPERATION CHECK [09/2014 - 03/2019]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END