LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RC 350 Base, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case System - Service Information >> Transfer Wire >> Installation [09/2014 - ] >> Procedure

Installation [09/2014 - ]: Procedure

  1. INSTALL TRANSFER TRANSMISSION WIRE 
    1. Coat the transfer transmission wire O-ring with ATF.
      GTY505470Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Transfer Transmission Wire O-ring
      Coat with Toyota Genuine ATF WS

      ATF

      Toyota Genuine ATF WS

    2. Install the transfer transmission wire to the transfer case sub-assembly with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

    3. Connect the transfer control solenoid assembly connector.
  2. INSTALL TRANSFER CONTROL VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [09/2014 - ] 

scientia non olet · About LEMON Manuals