Initialization [11/2017 - 11/2019]
- RESET BUB (BACK-UP BATTERY) CONDITION
HINT:
If the BUB (Back-Up Battery) has been replaced, it is necessary to perform this procedure.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Telematics / Utility / Backup Battery Replacement Reset
Body Electrical > Telematics > Utility
Tester Display Backup Battery Replacement Reset - According to the display on the Techstream, perform Backup Battery Replacement Reset to reset the BUB (Back-Up Battery) replacement flag.