LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> NX 200t Base, FWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information >> Tilt And Telescopic Manual Switch >> Installation [10/2014 - 05/2019] >> Procedure

Installation [10/2014 - 05/2019]: Procedure

  1. INSTALL TILT AND TELESCOPIC SWITCH 
    1. Attach the claw to install the tilt and telescopic switch.
    2. Connect the connector.
  2. INSTALL LOWER STEERING COLUMN COVER 
    1. Attach the 2 claws to install the lower steering column cover.
      NOTE:

      Do not damage the tilt and telescopic switch.

    2. Install the 3 screws.
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [10/2014 - 09/2017] , or refer to INITIALIZATION [09/2017 - 05/2019]

  4. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 
    1. Reset the auto tilt away function setting to the previous condition by changing the customize parameter.

      Refer to CUSTOMIZE PARAMETERS [10/2014 - ]

scientia non olet · About LEMON Manuals