Installation [10/2014 - ]: Procedure

INSTALL SPARK PLUG
HINT:

Perform "Inspection After Repairs" after replacing the spark plug.

Refer to INITIALIZATION [10/2014 - 05/2019] , or refer to INITIALIZATION [05/2019 - ]
1. Using a 16 mm spark plug wrench, install the 4 spark plugs.
  Torque: 25 N.m (255 kgf/cm, 18 ft.lbf)
  
  NOTE:
  Replace with a new part if it is dropped or if it receives a strong impact.
INSTALL IGNITION COIL ASSEMBLY
HINT:

Perform "Inspection After Repairs" after replacing the ignition coil assembly.

Refer to INITIALIZATION [10/2014 - 05/2019] , or refer to INITIALIZATION [05/2019 - ]
1. Install the 4 ignition coil assemblies with the 4 bolts.
  Torque: 10 N.m (102 kgf/cm, 7 ft.lbf)
  
  NOTE:
  Replace with a new part if it is dropped or if it receives a strong impact.
2. Connect the 4 ignition coil assembly connectors.
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 101 [10/2014 - 05/2019] , or refer to PROCEDURE - Step 102 [05/2019 - ]