Installation [09/2015 - ]: Procedure

INSTALL TILT AND TELESCOPIC MANUAL SWITCH
1. Attach the claw to install the tilt and telescopic manual switch.
2. Connect the connector.
INSTALL STEERING COLUMN COVER
1. Install the steering column lower cover and attach the 2 claws.
2. Install the 3 screws.
  HINT:
  
  Turn the steering wheel to the right and left as necessary to install the 2 screws.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
Reset the AUTO TILT AWAY function setting to the previous condition by changing the customize parameter (Refer to CUSTOMIZE PARAMETERS [09/2015 - ] ).
INSTALL COWL TOP VENTILATOR LOUVER RH
Refer to PROCEDURE - Step 15
PERFORM INITIALIZATION
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2015 - ] ).