Fail-Safe Chart [09/2015 - ]
- FRONT WIPER SYSTEM
- When the wiper switch is in any position other than "OFF" and the blades are frozen, a malfunction is detected by the passenger side junction block and the wiper operation is stopped.
HINT:
Recovery condition: Engine switch off.
- When the rain sensor is broken and the wiper switch is in the AUTO position, the front wiper system is changed to the intermittent mode.
HINT:
Recovery condition: Signal level error cancellation from rain sensor.
- When the rain sensor overheats and the front wiper is in the HI operation mode, the front wiper system is changed to the LO operation mode.
HINT:
Recovery condition: Engine switch off or wiper operation signal is not INT and LO.
- When the front light ECU malfunctions, the front wiper system can be set to the HI operation mode with the combination switch only.
HINT:
Recovery condition: front light ECU returns to normal.
- When the wiper switch is in any position other than "OFF" and the blades are frozen, a malfunction is detected by the passenger side junction block and the wiper operation is stopped.