DTC P010F: Mass or Volume Air Flow Sensor [09/2015 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine / Trouble Codes.
5. Read DTCs.

   Result

   Display (DTC Output)	Proceed to
   P010F	A
   P010F and other DTCs	B

   HINT: 

   If any DTCs other than P010F are output, troubleshoot those DTCs first.

Result:  B

B 

GO TO DTC CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2015 - 09/2016] Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2016 - ] )

Result:  A

A 

See step  2

1. Check the air induction system for vacuum leakage.

   OK

   No leakage from air induction system.

   HINT: 

   Perform "Inspection After Repair" after repairing or replacing the air induction system (Refer to INITIALIZATION [09/2015 - ] ).

Result:  NG

NG 

REPAIR OR REPLACE AIR INDUCTION SYSTEM 

Result:  OK

OK 

See step  3

OK

Ventilation hose is connected correctly and is not damaged.

HINT: 

Perform "Inspection After Repair" after replacing the mass air flow meter (Refer to INITIALIZATION [09/2015 - ] ).

Result:  OK

OK 

REPLACE MASS AIR FLOW METER (BANK 1 AND BANK 2) 

(Refer to REMOVAL [09/2015 - ] )

Result:  NG

NG 

REPAIR OR REPLACE VENTILATION HOSE 

(Refer to REMOVAL [09/2015 - ] )