Customize Parameters [09/2015 - ]: Procedure
- CUSTOMIZING WITH ACCESSORY METER ASSEMBLY
- Turn the engine switch on (IG).
- Using the accessory meter assembly, select "Setup", "General", and then "Feedback Force" and change the customize setting.
Display Default Content Setting Relevant ECU Feedback Force 0 (middle bar) Feedback force setting of the remote touch* -2, -1, 0, +1 or +2 Multi-media module receiver assembly NO FEEDBACK FORCE/ LEVEL1/LEVEL2/ LEVEL3/LEVEL4 HINT:
*: The higher the set value, the stronger the remote touch feedback force becomes.