How To Proceed With Troubleshooting [09/2015 - ]: Procedure

Result

Result:  1

NEXT 

See step  2

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result:  1

NEXT 

See step  3

1. Using the Techstream, check if the electric power control system is functioning normally.

   Result

   Result	Proceed to
   DTC B22B3 is not output	A
   DTC B22B3 is output	B

Result:  2

B 

GO TO ELECTRIC POWER CONTROL SYSTEM 

Result:  1

A 

See step  4

1. Use the Techstream to check if the CAN communication system is functioning.

   Result

   Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output	B

Result:  2

B 

GO TO CAN COMMUNICATION SYSTEM 

Result:  1

A 

See step  5

1. Check for DTC.

   Refer to DTC CHECK / CLEAR [09/2015 - ] 

2. Clear the DTC.

   Refer to DTC CHECK / CLEAR [09/2015 - ] 

3. Recheck the DTC.

   Refer to DTC CHECK / CLEAR [09/2015 - ] 

   Result

   Result	Proceed to
   DTC does not reoccur	A
   DTC reoccurs	B

Result:  2

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART 

Result:  1

A 

See step  6

Result

Result:  2

B 

See step  8

Result:  1

A 

See step  7

1. Terminals of ECU

   Refer to TERMINALS OF ECU [09/2015 - ] 

2. DATA LIST/ACTIVE TEST

   Refer to DATA LIST / ACTIVE TEST [09/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  8

Result

Result:  1

NEXT 

See step  9

Result

Result:  1

NEXT 

END