LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> LS 460 Base, AWD >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Pre-Collision System (W/ Driver Monitor Camera) - Diagnostics - Introduction >> PRE-COLLISION SYSTEM (w/ Driver Monitor Camera) >> DTC Check / Clear [09/2015 - ] >> DTC Check / Clear [09/2015 - ]

DTC Check / Clear [09/2015 - ]

  1. CHECK DTC 
    1. Turn the engine switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the engine switch on (IG).
    4. Enter the following menus: Body / Pre-Collision 1 / Trouble Code.
    5. Check for DTCs.
    6. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Code.
    7. Check for DTC.

      HINT: 

      As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the DTCs in Pre-Collision 1 and Pre-Collision 2.

  2. CLEAR DTC 
    1. Turn the engine switch off.
    2. Connect the Techstream to the DLC3.
    3. Turn the engine switch on (IG).
    4. Enter the following menus: Body / Pre-Collision 1 / Trouble Code.
    5. Select "Clear", and clear the data.
    6. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Code.
    7. Select "Clear", and clear the data.

      HINT: 

      As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the DTCs in Pre-Collision 1 and Pre-Collision 2.

scientia non olet · About LEMON Manuals