LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> LS 460 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System - Diagnostics - Introduction >> Navigation System >> Customize Parameters [09/2015 - ] >> Procedure

Customize Parameters [09/2015 - ]: Procedure

  1. CUSTOMIZING WITH ACCESSORY METER ASSEMBLY 
    1. Turn the engine switch on (IG).
    2. Using the accessory meter assembly, select "Setup", "General", and then "Feedback Force" and change the customize setting.
      Display Default Content Setting Relevant ECU
      Feedback Force 3 (middle bar) Feedback force setting of the remote touch* 1, 2, 3, 4 or 5 Multi-media module receiver assembly
      LEVEL1/LEVEL2/ LEVEL3/LEVEL4/LEVEL5

      HINT: 

      *: The higher the set value, the stronger the remote touch feedback force becomes.

scientia non olet · About LEMON Manuals