LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> LS 460 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Blind Spot Monitor System - Diagnostic Codes & Circuit Tests >> Blind Spot Monitor System >> DTC C1ABC: Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete [09/2015 - ] >> Procedure

DTC C1ABC: Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete [09/2015 - ]: Procedure

  1. PROCEED TO TEST MODE 
    1. Change the blind spot monitor sensor RH to Test Mode using the Techstream.

      HINT: 

      Refer to Blind Spot Monitor Beam Axis Inspection (Refer to OPERATION CHECK [09/2015 - 09/2016] Refer to OPERATION CHECK [09/2016 - ] ).

    Result:  NEXT

    NEXT 

    END 

scientia non olet · About LEMON Manuals