Installation [08/2015 - 10/2016]: Procedure

1. Install the level warning switch assembly as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Protrusion
   *b	Marking

   NOTE:

   Make sure that the protrusion of the level warning switch assembly is between the 2 markings.

2. Connect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Connect the washer hose.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

See step  2

1. Engage the 2 claws.
2. Install the cool air intake duct with the 3 bolts and screw.

for 8AR-FTS:

Refer to PROCEDURE - Step 79

for 2GR-FSE:

Refer to PROCEDURE - Step 105

Refer to INSTALLATION [04/2013 - 10/2016]

Refer to INSTALLATION [04/2013 - 10/2016]