LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 350 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Ecu >> Installation [09/2020 - ] >> Procedure

Installation [09/2020 - ]: Procedure

  1. INSTALL NAVIGATION ECU 
  2. INSTALL RADIO RECEIVER ASSEMBLY 
  3. INSTALL NO. 2 RADIO BRACKET 

    Refer to PROCEDURE - Step 4

  4. INSTALL NO. 1 RADIO BRACKET 

    Refer to PROCEDURE - Step 3

  5. INSTALL NO. 1 NAVIGATION WIRE 
    1. Connect the 2 connectors to install the No. 1 navigation wire.
  6. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET 

    Refer to PROCEDURE - Step 6

  7. INSTALL CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 5 [09/2020 - 11/2021] , or refer to PROCEDURE - Step 5 [11/2021 - ]

  8. INSTALL FRONT PANEL GARNISH RH 

    Refer to PROCEDURE - Step 8 [09/2020 - 11/2021] , or refer to PROCEDURE - Step 8 [11/2021 - ]

  9. INSTALL FRONT PANEL GARNISH LH 

    Refer to PROCEDURE - Step 9 [09/2020 - 11/2021] , or refer to PROCEDURE - Step 9 [11/2021 - ]

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 10 [09/2020 - 11/2021] , or refer to PROCEDURE - Step 10 [11/2021 - ]

  11. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 11 [09/2020 - 11/2021] , or refer to PROCEDURE - Step 11 [11/2021 - ]

  12. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12 [09/2020 - 11/2021] , or refer to PROCEDURE - Step 12 [11/2021 - ]

scientia non olet · About LEMON Manuals