LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 350 Base, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> Automatic Transmission System (Aa81E) - Service Information (2 Of 2) >> Kick-Down Switch >> Installation [08/2015 - 10/2017] >> Procedure

Installation [08/2015 - 10/2017]: Procedure

  1. INSTALL KICK DOWN SWITCH ASSEMBLY 
    1. Install the kick down switch assembly to the body with the nut and 2 bolts.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

    2. Connect the clamp to the kick down switch assembly.
    3. Connect the kick down switch assembly connector.
    4. Install the floor carpet to the original position.
      GTY463925Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Connect the clip to the body.
  2. INSTALL ACCELERATOR PEDAL ASSEMBLY (for 2GR-FSE) 

    Refer to INSTALLATION [04/2013 - 10/2017]

  3. INSTALL ACCELERATOR PEDAL ASSEMBLY (for 8AR-FTS) 

    Refer to INSTALLATION [08/2015 - ]

  4. INSTALL FRONT NO. 1 CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 9 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 8 [10/2016 - 09/2020]

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 13 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 12 [10/2016 - 09/2020]

scientia non olet · About LEMON Manuals