LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 350 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Navigation System - Symptom Tests (2 Of 2) & Circuit Tests >> Navigation System >> Switch Operation of Remote Touch not Accepted [04/2013 - 09/2020] >> Procedure

Switch Operation of Remote Touch not Accepted [04/2013 - 09/2020]: Procedure

  1. START DIAGNOSTIC MODE 
    1. Activate diagnostic mode and check if the "Service Menu" screen can be displayed.

      Refer to DTC CHECK / CLEAR [04/2013 - 06/2014] , or refer to DTC CHECK / CLEAR [06/2014 - 09/2018] , or refer to DTC CHECK / CLEAR [09/2018 - 09/2020]

      OK

      Diagnostic mode can be activated.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    See step  3

    Result: 

    OK 

    See step  2

  2. CHECK PANEL SWITCH (OPERATION CHECK) 
    1. Enter the "Panel&Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check.
      GTY314872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Refer to OPERATION CHECK [04/2013 - 09/2020]

    2. Operate the abnormal switch and check if the switch status is correctly displayed.

      OK

      The switch status is correctly displayed as operated.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [04/2013 - 09/2020] 

    Result: 

    NG 

    See step  3

  3. REMOTE TOUCH SELF CHECK (SWITCH OPERATION CHECK) 
    1. Activate self check mode.

      Refer to OPERATION CHECK [04/2013 - 09/2020]

    2. Check switch operation.
      GTY457562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Switch Illumination
      *b Switch Knob
      1. Move the remote touch switch knob to the lower left.
      2. Check that the "HOME" and "MENU" switches illuminate when each switch on the remote touch is pressed.

        Result

        Result Proceed to
        Self check mode cannot be activated. A
        Some switches do not turn on the "HOME" and "MENU" switch illumination when they are pressed.
        All switches turn on the "HOME" and "MENU" switch illumination when they are pressed. B

    Result: 

    REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [04/2013 - 09/2020] 

    Result: 

    See step  4

  4. REPLACE REMOTE OPERATION SWITCH 
    1. Replace the remote operation switch.

      Refer to DISASSEMBLY [04/2013 - 10/2016] , or refer to DISASSEMBLY [10/2016 - 09/2020]

    2. Check that each switch operation on the remote touch is accepted normally.

      OK

      Each switch operation is accepted normally.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    END 

    Result: 

    NG 

    REPLACE REMOTE OPERATION BOARD. Refer to  DISASSEMBLY [04/2013 - 10/2016]  , or refer to  DISASSEMBLY [10/2016 - 09/2020]