Inspection [10/2016 - ]: Procedure
- INSPECT SKID CONTROL BUZZER
- Make sure that there is no looseness at the locking part and the connecting part of the connector.
- Disconnect the skid control buzzer connector.
- Check both the connector case and the terminal for deformation and corrosion.
OK
No deformation or corrosion.
- Connect a positive (+) lead from the battery to terminal 2, and a negative (-) lead to terminal 1 of the skid control buzzer, and then check that the buzzer sounds.
OK
The skid control buzzer sounds.
If the result is not as specified, replace the skid control buzzer.
- Make sure that there is no looseness at the locking part and the connecting part of the connector.