LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 200t Base >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Pad Switch >> Installation [04/2013 - 10/2016] >> Procedure

Installation [04/2013 - 10/2016]: Procedure

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 2 claws and 2 pins to install the steering pad switch assembly to the steering wheel sub-assembly.
    2. Install the 2 screws.

      Torque: 2.35 N.m (24 kgf/cm, 21 in.lbf) 

    3. Connect the steering pad switch connector to the No. 1 switch wire.
    4. Engage the steering pad switch connector clamp to the lower steering wheel boss cover.
    5. Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.
  2. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [04/2013 - ]

scientia non olet · About LEMON Manuals