Customize Parameters [09/2020 - ]

CUSTOMIZING WITH REMOTE TOUCH (REMOTE OPERATION CONTROLLER ASSEMBLY)

Customizing with the touch function cancellation function.

NOTE:

Confirm the touchpad surface is free of foreign matter before customizing.

Fig 1: Customizing Remote Touch

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	"MAP" Switch
*b	"BACK" Switch

Simultaneously press and hold the "MAP" switch and "Back" switch for 5 seconds or more.

While pressing and holding the "MAP" switch and "Back" switch, tap the touchpad with 2 fingers.

Fig 2: While pressing and holding the "MAP" switch and "Back" switch, tap the touchpad with 2 fingers.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Example

HINT:

If any switch other than the "MAP" switch or "Back" switch is pressed, the customize setting cannot be changed.
Do not pinch in/out or slide fingers when tapping the touchpad with 2 fingers.

Confirm that the answer-back function vibrates the touchpad a specified number of times to indicate that the setting has changed.

SETTING

Touch Function Cancellation Function	Number of Answer Back Vibrations
Off (Default)	1
On	2

Repeat step (3) until the desired setting is selected.
HINT:

The touch function cancellation function alternates between on and off.
Release the "MAP" switch and "Back" switch to select the set value.