Installation [08/2015 - ]: Procedure

INSTALL STABILIZER CONTROL ECU
1. Install the stabilizer control ECU with the bolt.
  Torque: 14 N*m (138 kgf*cm, 10 ft.*lbf)
  NOTE:
  - Replace the stabilizer control ECU with a new one if it is dropped.
  - Make sure the bracket rotation stopper touches the installation position.
2. Connect the connector.
  NOTE:
  Securely connect the connector.
INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
1. Install the lower No. 1 instrument panel airbag assembly (Refer to INSTALLATION [08/2015 - ] ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] , or refer to INITIALIZATION [08/2019 - 08/2021] , or refer to INITIALIZATION [08/2021 - 08/2022] , or refer to INITIALIZATION [08/2022 - ] ).