LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> GX 460 Base >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column (Service Information) >> Steering Wheel >> Installation [08/2015 - 08/2019] >> Procedure

Installation [08/2015 - 08/2019]: Procedure

  1. ADJUST SPIRAL CABLE 

    Refer to PROCEDURE - Step 4 [08/2015 - 08/2017] , or refer to PROCEDURE - Step 5 [08/2017 - 08/2019]

  2. INSTALL STEERING WHEEL ASSEMBLY 
    1. Align the matchmarks on the steering wheel assembly and steering main shaft assembly.
    2. Install the steering wheel assembly set nut.

      Torque: 50 N*m (510 kgf*cm, 37 ft.*lbf) 

  3. INSTALL STEERING SHAKE DAMPER 
    1. Install the steering shake damper with the 2 bolts.
  4. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY 

    See step  1

  5. INSTALL CRUISE CONTROL MAIN SWITCH 

    Refer to PROCEDURE - Step 1

  6. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Attach the 2 claws to install the steering pad switch assembly.
    2. Install the 4 screws.
    3. Connect the connector.
  7. INSTALL STEERING PAD ASSEMBLY 

    Refer to PROCEDURE - Step 1

  8. INSTALL NO. 2 STEERING WHEEL LOWER COVER 

    Refer to PROCEDURE - Step 3

  9. INSTALL NO. 3 STEERING WHEEL LOWER COVER 

    Refer to PROCEDURE - Step 2

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2019] ).

  11. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (Refer to DIAGNOSIS SYSTEM [08/2015 - 08/2019] ).
scientia non olet · About LEMON Manuals