Input Shaft

INPUT SHAFT

Input shaft journal outer diameter	Min.	47.59 mm (1.88 in.)
Input gear stopper snap ring thickness		2.10 to 2.15 mm (0.0827 to 0.0846 in.)
		2.15 to 2.20 mm (0.0846 to 0.0866 in.)
		2.20 to 2.25 mm (0.0866 to 0.0886 in.)
		2.25 to 2.30 mm (0.0886 to 0.0906 in.)
		2.30 to 2.35 mm (0.0906 to 0.0925 in.)
		2.35 to 2.40 mm (0.0925 to 0.0945 in.)
		2.40 to 2.45 mm (0.0945 to 0.0965 in.)
		2.45 to 2.50 mm (0.0965 to 0.0984 in.)
		2.50 to 2.55 mm (0.0984 to 0.100 in.)
		2.55 to 2.60 mm (0.100 to 0.102 in.)
		2.60 to 2.65 mm (0.102 to 0.104 in.)
		2.65 to 2.70 mm (0.104 to 0.106 in.)
		2.70 to 2.75 mm (0.106 to 0.108 in.)
		2.75 to 2.80 mm (0.108 to 0.110 in.)
		2.80 to 2.85 mm (0.110 to 0.112 in.)
		2.85 to 2.90 mm (0.112 to 0.114 in.)
		2.90 to 2.95 mm (0.114 to 0.116 in.)
		2.95 to 3.00 mm (0.116 to 0.118 in.)
		3.00 to 3.05 mm (0.118 to 0.120 in.)