System Description [08/2015 - 08/2019]

ILLUMINATION CONTROL SYSTEM (Illuminated Entry System)

The illuminated entry system has the following control functions:

Control	Outline	Lighting
Actuation Area-linked	When a registered key enters any actuation area around the doors, the lights that operate turn on.	Engine switch illumination Map light assembly No. 1 room light assembly No. 2 room light assembly Side step lights
Door Lock/Unlock-linked	When any door is unlocked, the lights that operate turn on.	Engine switch illumination Map light assembly No. 1 room light assembly No. 2 room light assembly Side step lights Interior foot lights Inside handle illumination
Door Lock/Unlock-linked	When all doors are locked, the lights that operate turn off.
Door Open/Close-linked	When any door is opened, the lights that operate turn on.	Engine switch illumination Map light assembly No. 1 room light assembly No. 2 room light assembly Side step lights Interior foot lights Inside handle illumination Door courtesy lights
Door Open/Close-linked	When all doors are closed, the lights that operate turn off.
Engine Switch-linked	When the engine switch is turned from on (ACC or IG) to off, the lights that operate turn on.	Engine switch illumination Map light assembly No. 1 room light assembly No. 2 room light assembly
Engine Switch-linked	When the engine switch is turned from off to on (ACC or ON), the lights that operate turn on.	Center console spot light

BATTERY SAVING CONTROL SYSTEM

The battery saving control system has the following control functions:

Control	Outline	Lighting
Interior light auto cut function	When the doors remain in the same condition for 20 minutes and the key is outside the vehicle exterior detection area, the illumination of the items listed to the right turns off.	Engine switch illumination Map light assembly No. 1 room light assembly No. 2 room light assembly Side step lights Interior foot lights Inside handle illumination Vanity lights Scuff plate lights*

*: w/ Scuff Plate Light