Installation [10/2015 - 09/2017]: Procedure

1. Install the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly with 4 new screws.

   Torque: 1.7 N*m (17 kgf*cm, 15 in.*lbf) 

2. Engage the 5 guides to install the No. 1 switch wire to the steering wheel assembly.
3. Connect the 2 shift paddle switch (transmission shift switch assembly) connectors.
4. Connect the No. 1 switch wire connector.
5. Engage the No. 1 switch wire connector clamp to the steering wheel assembly.

Refer to INSTALLATION [10/2015 - 09/2017]