LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> GS F >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Pad Switch >> Installation [09/2017 - ] >> Procedure

Installation [09/2017 - ]: Procedure

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 2 claws and 2 pins to install the steering pad switch assembly to the steering wheel sub-assembly.
    2. Install the 2 screws.

      Torque: 2.4 N*m (24 kgf*cm, 21 in.*lbf) 

    3. Connect the steering pad switch connector to the No. 1 switch wire.
    4. w/o Steering Wheel Vibration:
      1. Engage the steering pad switch connector clamp to the lower steering wheel boss cover.
    5. Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.
  2. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [10/2015 - ]

scientia non olet · About LEMON Manuals