DTC P2610: ECM / PCM Internal Engine Off Timer Performance [10/2015 - ]: Procedure

1. Replace the ECM.

   Refer to REMOVAL [10/2015 - 09/2017] , or refer to REMOVAL [09/2017 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

5. Turn the engine switch off and wait for at least 30 seconds.
6. Turn the engine switch on (IG).
7. Turn the Techstream on.
8. Drive the vehicle in accordance with the driving pattern described in the Confirmation Driving Pattern.
9. Enter the following menus: Powertrain / Engine / Trouble Codes / Pending.

   Powertrain > Engine > Trouble Codes 

10. If no pending DTC is output, the repair has been successfully completed.

    Result

    Proceed to
    NEXT

Result: 

NEXT 

END