DTC C1AA0: Front Camera Module Circuit [10/2015 - 09/2017]: Procedure

1. Check if the stored DTCs are current DTCs.
2. Connect the Techstream to the DLC3.
3. Turn the engine switch on (IG).
4. Turn the Techstream on.
5. Enter the following menus: Chassis / LKA/LDA / Trouble Codes.
6. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2015 - 09/2017]

   Chassis > LKA/LDA > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1AA0 is output	A
   DTC C1AA0 is not output	B

Result: 

B 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - 09/2016]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2016 - 09/2017] 

Result: 

A 

See step  2

1. Replace the forward recognition camera.

   Refer to REMOVAL [10/2015 - 09/2017]

2. Adjust the forward recognition camera.

   Refer to ADJUSTMENT [10/2015 - 09/2017]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END