LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> GS 450h Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution (Service Information) >> Integration Relay >> Installation [09/2014 - ] >> Procedure

Installation [09/2014 - ]: Procedure

  1. INSTALL NO. 2 INTEGRATION RELAY 
    1. Connect the 3 connectors.
    2. Attach the 2 claws to install the No. 2 integration relay.
  2. INSTALL NO. 1 RELAY BLOCK COVER 
    1. Attach the 3 claws.
    2. Attach the 2 clamps and install the No. 1 relay block cover.
  3. INSTALL COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 117 Refer to PROCEDURE - Step 116

  4. INSTALL ENGINE ROOM SIDE COVER 

    Refer to PROCEDURE - Step 118 Refer to PROCEDURE - Step 117

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See article. Refer to INITIALIZATION [09/2014 - 10/2015] Refer to INITIALIZATION [10/2015 - ] ).

  6. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH 

    Refer to PROCEDURE - Step 24

  7. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 

    Refer to PROCEDURE - Step 26

scientia non olet · About LEMON Manuals