Display Signal Circuit between Multi-display and Radio Receiver [09/2014 - 10/2015]: Procedure

1. Check if the GVIF cable connector between the multi-media module receiver assembly and the accessory meter assembly has any connection problems.
2. Check that the screen display is normal.

   OK

   Screen display is normal.

Result:  OK

OK 

USE SIMULATION METHOD TO CHECK 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] )

Result:  NG

NG 

See step  2

1. Replace the accessory meter assembly with a new or normally functioning one (Refer to REMOVAL [09/2014 - ] ).
2. Check that the screen display is normal.

   OK

   Screen display is normal.

Result:  OK

OK 

END (ACCESSORY METER ASSEMBLY IS DEFECTIVE) 

Result:  NG

NG 

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE 

(Refer to PROBLEM SYMPTOMS TABLE [09/2014 - ] )