LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> GS 350 Base, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Wheel >> Installation [09/2014 - 10/2015] >> Procedure

Installation [09/2014 - 10/2015]: Procedure

  1. INSTALL STEERING SHAKE DAMPER 
    1. Install the shake damper with the 2 screws.
  2. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY (w/ Steering Heater) 

    See step  1

  3. INSTALL STEERING WHEEL BOSS LOWER COVER 
    1. Attach the 4 claws to install the steering boss cover to the steering wheel assembly.
    2. w/ Steering Heater:

      Connect the connector to the steering wheel heater control assembly.

  4. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY 

    Refer to PROCEDURE - Step 4

  5. INSTALL CRUISE CONTROL SWITCH WIRE 
    1. Install the cruise control switch wire.
  6. INSTALL CRUISE CONTROL MAIN SWITCH 

    Refer to PROCEDURE - Step 1

  7. INSTALL STEERING PAD SWITCH ASSEMBLY 

    See step  1

  8. ADJUST SPIRAL WITH SENSOR CABLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 7

  9. INSTALL STEERING WHEEL ASSEMBLY 
    1. Align the matchmarks on the steering wheel assembly and steering main shaft assembly.
    2. Install the steering wheel assembly set nut.

      Torque: 50 N*m (510 kgf*cm, 37 ft.*lbf) 

    3. Connect the connectors to the spiral cable.
  10. INSTALL STEERING PAD 

    (Refer to INSTALLATION [09/2014 - 10/2015] )

  11. CHECK FRONT WHEELS FACING STRAIGHT AHEAD 
  12. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION (w/ VGRS) 

    (Refer to CALIBRATION [09/2014 - ] )

  13. PERFORM INITIALIZATION (w/ VGRS) 

    (Refer to INITIALIZATION [09/2014 - ] )

scientia non olet · About LEMON Manuals