DTC Check / Clear [09/2014 - 10/2015]

CHECK DTC
1. Turn the engine switch off.
2. Connect the Techstream to the DLC3.
3. Turn the engine switch on (IG).
4. Enter the following menus: Body Electrical / Pre-Collision 1 / Trouble Code.
5. Check for DTCs.
6. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Code.
7. Check for DTC.
  HINT:
  
  As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the DTCs in Pre-Collision 1 and Pre-Collision 2.
CLEAR DTC
1. Turn the engine switch off.
2. Connect the Techstream to the DLC3.
3. Turn the engine switch on (IG).
4. Enter the following menus: Body Electrical / Pre-Collision 1 / Trouble Code.
5. Select "Clear", and clear the data.
6. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Code.
7. Select "Clear", and clear the data.
  HINT:
  
  As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the DTCs in Pre-Collision 1 and Pre-Collision 2.