DTC B2036: Power Supply Relay Malfunction Open [09/2014 - 10/2015]: Procedure

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the seat belt control ECU connector.
2. Measure the voltage according to the value(s) in the table below.

   Standard Voltage

   Tester Connection	Condition	Specified Condition
   U34-7 (+B) - Body ground	Always	11 to 14 V

   TEXT IN ILLUSTRATION
   
   

   *a	Front view of wire harness connector (to Seat Belt Control ECU)

3. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   U34-8 (PGND) - Body ground	Always	Below 1 Ω

Result: 

OK 

REPLACE SEAT BELT CONTROL ECU 

(Refer to REMOVAL [09/2014 - 10/2015] )

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR