How To Proceed With Troubleshooting [09/2014 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Result

Result: 

NEXT 

See step  3

1. Measure the battery voltage with the engine switch off.

   Standard Voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  4

1. Use the Techstream to check if the CAN communication system is functioning normally (Refer to DIAGNOSIS SYSTEM [09/2014 - 10/2015] Refer to DIAGNOSIS SYSTEM [10/2015 - 09/2017] or refer to DIAGNOSIS SYSTEM [09/2017 - 09/2018] or refer to DIAGNOSIS SYSTEM [09/2018 - ] ).

   Result

   Result	Proceed to
   CAN DTC is not output (w/ Rain Sensor)	A
   CAN DTC is not output (w/o Rain Sensor)	B
   CAN DTC is output	C

Result: 

B 

See step  8

Result: 

C 

GO TO CAN COMMUNICATION SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )

Result: 

A 

See step  5

1. Check if the LIN communication system is functioning normally (Refer to PROBLEM SYMPTOMS TABLE [09/2014 - ] ).

   Result

   Result	Proceed to
   LIN communication system is functioning normally	A
   LIN communication system is not functioning normally	B

Result: 

B 

GO TO LIN COMMUNICATION SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - ] )

Result: 

A 

See step  6

1. Refer to the Problem Symptoms Table (Refer to PROBLEM SYMPTOMS TABLE [09/2014 - 10/2015]  or refer to PROBLEM SYMPTOMS TABLE [10/2015 - ] ).

   Result

   Result	Proceed to
   Fault is not listed in Problem Symptoms Table	A
   Fault is listed in Problem Symptoms Table	B

Result: 

B 

ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE 

Result: 

A 

See step  7

1. Terminals of ECU (Refer to TERMINALS OF ECU [09/2014 - 10/2015]  or refer to TERMINALS OF ECU [10/2015 - ] ).
2. Fail-safe chart (Refer to FAIL-SAFE CHART [09/2014 - ] ).

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

See step  9

Result

Result: 

NEXT 

END