LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> GS 200t Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Crankshaft Position Sensor >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

  1. REMOVE ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 9 (10/2015 - 09/2016) or PROCEDURE - Step 9 (09/2016 -)

  2. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
    2. GTY504332Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Remove the bolt and crankshaft position sensor.

scientia non olet · About LEMON Manuals