LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> GS 200t Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Level Sensor >> Installation [10/2015 - ] >> Procedure

Installation [10/2015 - ]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install a new gasket to the engine oil level sensor.
    2. Install the engine oil level sensor to the oil pan sub-assembly with the 4 bolts.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

      HINT: 

      Be sure to clean the contact surface.

    3. Connect the engine oil level sensor connector.
  2. INSTALL FRONT SUSPENSION MEMBER BRACE 

    Refer to PROCEDURE - Step 93

  3. ADD ENGINE OIL 

    See step  4

  4. INSPECT ENGINE OIL LEVEL 

    See step  5

  5. INSPECT FOR OIL LEAK 

    See step  6

scientia non olet · About LEMON Manuals