How To Proceed With Troubleshooting [07/2015 - ]: Procedure

Result

Result:  1

NEXT 

See step  2

Standard Voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result:  1

NEXT 

See step  3

1. Use the Techstream to check if the CAN communication system is functioning normally. Refer to DIAGNOSIS SYSTEM [07/2015 - 08/2016] Refer to DIAGNOSIS SYSTEM [08/2016 - ]

   Result

   Result	Proceed to
   CAN DTCs are not output.	A
   CAN DTCs are output.	B

Result:  2

B 

GO TO CAN COMMUNICATION SYSTEM 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2015 - ]

Result:  1

A 

See step  4

1. Check for DTCs. Refer to DTC CHECK / CLEAR [07/2015 - ] 

   Result

   Result	Proceed to
   DTCs are not output.	A
   DTCs are output.	B

Result:  2

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART 

Refer to DIAGNOSTIC TROUBLE CODE CHART [07/2015 - ] 

Result:  1

A 

See step  5

1. Refer to Problem Symptoms Table. Refer to PROBLEM SYMPTOMS TABLE [07/2015 - ] 

   Result

   Result	Proceed to
   Problem symptom does not occur.	A
   Problem symptom occur.	B

Result:  2

B 

See step  7

Result:  1

A 

See step  6

1. Terminals of ECU. Refer to TERMINALS OF ECU [07/2015 - ] 
2. Data List / Active Test. Refer to DATA LIST / ACTIVE TEST [07/2015 - ] 

   Result

   Proceed to
   NEXT

Result:  1

NEXT 

See step  7

Result

Result:  1

NEXT 

See step  8

Result

Result:  1

NEXT 

END