DTC B1796: Sleep Operation Failure of Occupant Classification ECU [07/2015 - ]: Procedure

1. Turn the engine switch off.
2. Disconnect the cable from the negative (-) battery terminal.
3. Replace the occupant detection ECU (Refer to REMOVAL [07/2015 - ] ).
4. Connect the cable to the negative (-) battery terminal.

Result:  NEXT

NEXT 

See step  2

1. Using the Techstream, perform Zero Point Calibration and Sensitivity Check (Refer to INITIALIZATION [07/2015 - ] ).

Result:  NEXT

NEXT 

END