Disc cannot be Inserted or is Ejected Right After Insertion [07/2015 - 08/2016]: Procedure
- CHECK IF A PROPER DISC IS INSERTED
- Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
OK
Normal disc
HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- CDs and DVDs with adhesive paper labels should not be played.
- Commercial audio CDs and DVDs can be played.
- CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
- MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.
- For details on playable CDs and DVDs, refer to Owner's Service Information.
Result: NG
NG
CHANGE DISC
Result: OK
OK
See step 2
- Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
- CHECK THAT DISC IS INSERTED PROPERLY
- Check if the disc is inserted upside down.
OK
Disc is properly inserted.
Result: NG
NG
INSERT DISC PROPERLY
Result: OK
OK
See step 3
- Check if the disc is inserted upside down.
- CLEAN DISC AND RECHECK
- Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.
OK
Malfunction disappears.
NOTE:Do not use a conventional record cleaner or anti-static preservative.
Result: OK
OK
END (DISC WAS DIRTY)
Result: NG
NG
See step 4
- Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.
- REPLACE DISC AND RECHECK
- Replace the disc with a new or known good one and check that the malfunction disappears.
OK
Malfunction disappears.
Result: OK
OK
END (DISC WAS FAULTY)
Result: NG
NG
REPLACE RADIO RECEIVER ASSEMBLY
(Refer to REMOVAL [07/2015 - ] )
- Replace the disc with a new or known good one and check that the malfunction disappears.