LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> ES 300h >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Power Switch >> Installation [07/2015 - ] >> Procedure

Installation [07/2015 - ]: Procedure

  1. INSTALL POWER SWITCH 
    1. Engage the 2 claws to install the power switch.
  2. INSTALL SWITCH BASE 

    Refer to PROCEDURE - Step 24

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 28

  4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 29

  5. INSTALL INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 30

  6. INSTALL FRONT DOOR OPENING TRIM COVER LH 

    Refer to PROCEDURE - Step 31

  7. INSTALL COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 32

  8. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 33

  9. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type) 

    Refer to INSTALLATION [07/2015 - ]

  10. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type) 

    Refer to INSTALLATION [07/2015 - ]

  11. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION [07/2015 - ] .

  12. INSTALL LUGGAGE TRIM SERVICE HOLE COVER 

    Refer to PROCEDURE - Step 3

scientia non olet · About LEMON Manuals